For you to get a very clear view on removing asbestos below are some guidelines you need to remember. Part of the preparation for the removal of asbestos-containing substances is by complying with the Asbestos Removal Code. Specifying the constraints required in the removal procedure is quite important. You need to keep the area secure by putting up signs and barriers in the region so that nobody can enter the premise. After which, electrical, lighting installations and furniture must be removed. The ventilation and air conditioning must be sealed off to prevent asbestos from entering the ventilation ducts. In case you need to have lighting in the region, you need to use portable work lights that are wired and grounded to an outside circuit for security measures. Personal Protective Equipment (PPE) should as well be accessible. Complete protective wear, head covers, masking, over boots, gloves and respiratory protective gear like a gas mask with dual cartridges and HEPA filters are necessary. If you are hunting to learn more about waste containers for asbestos, take a look at above site.
To prevent asbestos from being airborne, tools required for the removal might include a 2-3 gallon tank sprayer, liquid detergent, putty knives, step ladders, plastic sheeting, asbestos waste disposal bags, duct tape, sealant. To contain the work area, plastic sheeting must be used on the walls and floors and seal off everything with duct tape. After preparing the job site and the materials needed, you need to carefully wet the asbestos-containing substance with “amended” water, which is water mixed with liquid detergent. Do not ever blow up the contaminated area with water. This is crucial to keeping the fibres undamaged so to forbid them from being breathed in. You may start scraping off the asbestos-bearing material cautiously when you’re finished soaking it. Never split them into pieces for they may nevertheless contain fibers which you could ingest. You need to carefully scrape all the material and leave it intact. The material should nevertheless be soaked in water when this process is finished. Otherwise, it is time for you to stop working and call in an expert to finish the job.
You need to scrape off the walls or floors first before sealing the area with paint. After scraping off the material, you need to place it in special disposal bags including your disposable coveralls. These should be double bagged and double wrapped. The specific bin is mandatory in putting asbestos away because it’s unlawful to place asbestos waste and combine it with domestic garbage bins. Appropriate classification and the contents of the waste material is needed for each bag for security purposes. Asbestos waste must be disposed of in designated landfills assigned by the neighborhood council so it is necessary to set an appointment with them when you can have your asbestos-containing material disposed. If you will need to hire a company to dispose of your asbestos wasteremember to keep a copy of the receipts as the council may look for these records to ensure the proper disposal of the asbestos waste.